W5500-EVB-Pico
Crystal 12MHz and 25MHz for W5500-EVB-Pico
W5500-EVB-Pico is a microcontroller evaluation board based on the Raspberry Pi RP2040 and fully hardwired TCP/IP controller W5500 – and basically works the same as Raspberry Pi Pico board but with additional Ethernet via W5500.
- Raspberry Pi Pico Clone
- Ethernet (W5500 Hardwired TCP/IP CHIP)
- AWS IoT Core Qualified
- Microsoft Azure Device Certified
Pin-out
W5500-EVB-Pico pinout is directly connected to the GPIO of RP2040 as shown in the picture above. It has the same pinout as the Raspberry Pi Pico board. However, GPIO16, GPIO17, GPIO18, GPIO19, GPIO20, GPIO21 are connected to W5500 inside the board. These pins enable SPI communication with W5500 to use Ethernet function. If you are using the Ethernet function, these pins cannot be used for any other purpose.
Crystal 12MHz and 25MHz for W5500-EVB-Pico
如上图所示：
25MHz晶振两端需要接的匹配电容为18PF，12MHz晶振两端需要接的匹配电容为15PF。
Dimension (Unit : mm)
